| 产地：韩国 |
厂商：韩国LG-EZ |
市场价格： |
我们价格： |
| |
|
 |
|
Main Features |
|
· |
100MHz, 2Ch, 4 trace, Delay sweep
function |
|
· |
DC to 100MHz bandwidth, 2 channels, 4
trace |
|
· |
6" rectangular CRT with internal
graticule |
|
· |
HF / LF reject trigger filter |
|
· |
Auto set function |
|
· |
Frequency counter function (only on auto set)
|
|
· |
Readout cursor function |
|
· |
5ns / div. fast sweep rate |
|
· |
Ch 1 output |
|
· |
Delay sweep function |
|
· |
Hold-off function |
|
· |
Dual time base | |
|
|
| |
|
|
|
|
|
CRT |
- Configuration and useful screen :
6 inch rectangular screen with internal
graticule, 8X10div.(1div = 1cm)
marking
for measurement of rise time, 2mm subdivisions along the
central axis.
- Acceleration
potential : +11.5kv approx.(ref. Cathode)
- Phosphor
: P31
- Focusing : provided with auto focus
correction circuit
- Trace rotation : provided
-
Intensity control : provided
- Scale illumination :
provided |
|
|
|
Z-AXIS INPUT
(INTENSITY
MODULATION) |
- Input signal : positive going signal
decreases +5Vp-p or more signal
cases
intensity noticeable modulation at normal intensity
setting
- Bandwidth : DC to 2MHz(-3dB)
- Coupling
: DC
- Input impedance : 20~30kΩ typical
- Maximum
input voltage : 30V(DC + peak AC) |
|
|
|
VERTICAL
DEFLECTION
|
- DC coupled(-3dB) : DC to 100MHz normal
/ DC to 50MHz with
2mV/div.
- AC
coupled(-3dB) : 10Hz to 100MHz normal / 10Hz to 50MHz
with
2mV/div.
- Modes : CH1, CH2,
DUAL, ADD, CHOP, ALT, CH2 INV
- Deflection factor
(normal) : 2mV/div. to 5V/div. in 11 calibrated steps of
1-2-5 sequence (Ch3, Ch4 : 0.1V/div to
0.5V/div.) Continuously variable
between
steps at least 1:2.5 X 5.
- Accuracy : normal
±3%
- Input impedance : approx. 1MΩ in parallel with
25pF
- Maximum input voltage : direct 400V (DC + peak
AC)
- Input coupling : AC, GND, DC
- Rise time :
3.5ns or less (7ns or less : 2mV/div.)
- CH1 output :
50mV/div. into 50Ω / DC to 20MHz(-3dB)
- Polarity
inversion : CH2 only
- Signal delay : delay cable
installed |
|
|
|
HORIZONTAL
DEFLECTION
|
- Sweep mode : A, B, B triggered, X-Y,
ALT
- Time base A : 50ns/div. to 0.5s/div. in 22
calibrated steps of 1-2-5
sequence
uncalibrated continuous control between steps at least
1:2.5
- Hold-off time on time base A : variable with
the hold-off control
- Time base B : 50ns/div. to
0.5s/div. in 22 calibrated steps of 1-2-5
sequence
- Delay sweep on time base
B : 1div. or less to 10 div. or more
- Sweep
magnification : 10 times (max. sweep rate :
5ns/div.)
- Accuracy : ±3%, ±5%(1:10 probe) |
|
|
|
TRIGGER
SYSTEM |
- Modes : AUTO, NORM, TV-V, TV-H,
Single
- Source : CH1, CH2, LINE, VERT
- Coupling
: AC, DC, HF-R, LF-R
- Slope : + or -
-
Sensitivity and frequency in AUTO, NORM DC - 10MHz :
0.5div. in INT / 0.15Vp-p in EXT /
1.5div. in VERT
- Sensitivity and frequency in AUTO,
NORM 10MHz - 100MHz :
1.5div. in INT /
0.6Vp-p in EXT / 30.0div. in VERT
- Sensitivity and
frequency in TV-V and TV-H :
1.0div. or
more 0.1V(trigger part)
- External trigger input
impedance :
approx. 1MΩ in parallel
with 25pF
- Maximum input voltage : 400V (DC + AC
peak) |
|
|
|
X-Y OPERATION
|
- Sensitivity : same as vertical
deflection for both X-axis(CH1) except
accuracy ± 6% in X-axis from
DC~2MHz(-3dB), Y-axis is same as CH2
- X-Y phase
difference : 3° or less as DC to 100kHz |
|
|
|
READOUT
FUNCTION |
- Cursor readout function : ΔV, ΔT,
Δ1/T
- Auto setup : available from 100Hz to
50MHz
- Frequency counter display : available only on
auto setup mode
- Resolution : 1/100 div. |
|
|
|
|
CALIBRATOR |
- Probe adjustment : approx. 1kHz
frequency, 0.5V(± 3%) square wave with 50%
duty ratio |
|
|
|
|
POWER SUPPLY |
- Line voltage range : 90~250V with 250V
1.6A time lag type fuse
- Line frequency :
48~440Hz
- Power consumption : approx. 50W |
|
|
|
|
PHYSICAL CHARACTERISTICS |
- Weight : 8kg
- Dimension : 328mm(W)
X 153mm(H) X 392mm(L) |
|
|
|
|
OTHERS |
- Accessories including : Operation
manual, Spare fuse, Power cord
- Optional accessories
(sold separately) : Probe |
|
|
|
